Toddler nose sucker

Toddler Nose Sucker ( Snot Sucker )

If you are a parent and the cold time approach you know that this tool is one of the most important tool for a good sleep for your toddler but not only. They don't know how to blow their little noses and they do need our help. This nose sucker saved us as parents for several nights with a good sleep.

You know how they get fussy and angry and our Nose Sucker that we bought, got broken after a small period of time. Our kid even made it disappear like a little magician he is or he broke it with intent, or even hid some parts. But now it takes about 2 hours to get a new one. You only need the tube/hose .

Made out of 4 parts that screw together there are no need for other additional parts just the rubber or silicone tube/hose with an interior diameter of ~7mm ( 6x8mm tube) .

You can use your mouth to operate, the interior chamber separates the snot to not inhale ‘em. Or you can use a low power vacuum cleaner to do the job for you. But in our experience using the mouth works best ( even the parents I previously spoke to prefer this method). The adapter was made to fit exactly the hand held vacuum cleaner from Roventa X-Pert Essential . On request I can make adapters for your type of vacuum but you have to provide accurate measurements or at least the model and I’ll try to find a technical drawing.

1. Step

   

2. Step - Insert the snot chamber. A little fiddle is required but once it will go in it's going to be easy all the time.

   

3. Step - Insert the body over the snot chamber.

   

4. Step - Screw the body in the nozzle.

   

5. Step - Attach the tube/hose to the main body. Check last drawing to avoid damage to the pipe.

   

For hose connection:

! ATTENTION : When screwing the body do not tighten the body by holding the Hose Connection. It will break due to lateral force!!! If you need extra force to screw keep your thumb on the 45° connection.

* The product is smaller in reality, is placed just as an example.