Pentair IntelliChlor Stenner Pump Sun Shield

A simple sun shield for the Pentair IntelliChlor Stenner pumps. My pump sits in the sun all day, and I've been going through the tubes at a faster rate than the same pump that is in a shaded area with similar use. I figure it's either the heat or the direct sunlight that's causing the accelerated degradation. So I designed this simple cover that slips on and should stay on using friction. In super windy areas a zip tie or some double sided tape could help keep it in place.

Designed to be printed with the top down, which will require minimal support. I used tree supports for the two retaining tabs, that's all that was necessary.