Search models, users, collections, and posts
20L Moisture-Proof Box External Dryer Box + Xiaomi Temperature Meter 2 Magnetic Mount
IP Report
Print Profile(1)
0.2mm layer, 2 walls, 15% infill
Designer
4.6 h
4 plates
Open in Bambu Studio
Boost
1
1
0
0
1
0
Released
Description
Content has been automatically translated.
Boost Me (for free)
Recently, I disassembled the AMS and installed it on a 20L drying cabinet. The overall effect is good. To further optimize the drying effect, I purchased a temperature-controlled heating device on Taobao, but it is a bit thick, so I made it an external form. I made this box to secure it and maintain a seal.
The switch and light positions were not made, only the heating fan was enclosed.
You will need 14 M3*8 screws and 14 M3 nuts.
If the test is successful, it is best to use glue for an additional seal.
This is the heater I purchased, 80w with illumination, approximately 138 yuan. Illumination can be removed, the wires with illumination are a bit messy. I plan to remove the illumination later or tidy up the wires.
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial-Share Alike
Comment & Rating (0)