Detail Knife with Cap
Print Profile(1)
Description
Summary
This cutter with cap was designed to hold a single piece from an 18mm snap-off cutting blades, such as this one:
https://www.homedepot.ca/product/olfa-18mm-snap-off-replacement-blades-10-pack/1000103362
After 'snapping-off' a blade, gently place it into the 'Cutter.STL' end squarely, then while holding the Cutter securely, the the blade against some sacrificial piece of wood or plastic.
The 'Cutter Cap.STL' can be safely put on by first laying the tip of the blade inside the cap from the top or bottom of the clipping part, then gently pressing the Cutter up into the Cutter Cap arms.
Feel free to remix for difference sizes!
'Cutter_LowerGrip.STL' was added because sometimes the blade had trouble being pushed in. If you have issues, this one work better.
DO NOT PRINT WITH SUPPORTS
ALWAYS BE CAREFUL HANDLING SHARP THINGS.
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
Rafts:
No
Supports:
No
Resolution:
200
Infill:
30% Grid
Filament: - PLA
How I Designed This
License
Comment & Rating (3)