Cat Carpet Climber Pole - Corner Supports Climbing

*Revised to add a cap to match :)

Supports for holding a carpet roll in place securely while your kitty can climb away! It is NOT meant to be hanging/weight-bearing. While I believe it could be made to do this, considerations would need to be made and I have not tested that. It does, however, firmly hold a carpet roll in place with much of the weight being held by the tube. It is offset so the role will not be directly against the wall - which also allows support over trim.

I used drywall anchors to affix each unit and medium-sized zip ties to connect the brackets. There are small holes on the sides if you wish to try and put a screw in the sides of the tube and support.

I will be making a complete step/areal cat perch soon, with some remixed items and shelves.

Items:

• Used cardboard carpet roll (from a carpet place)
• New or Used carpet cut to fit the carpet roll
• Standard PLA
• Screws/Drywall supports
• Large staples/Staple-gun
• Medium/Large Zip ties (or similar sturdy items)