Sunbu Loader Stand holder

Of course, one can not say enough good things about MrX.3D's Sunbu Lab AMS Lite 1.0 model - it's genius. jdfletch has created a stand to make loading and unloading of filament spools easier. I wanted to store the stand where it was both convenient and out of the way. For me this is at the edge, under the table my Filadryer is on.

The hooks are designed to stick out past the edge of the table so they are easily seen for quick placement of the stand. Placing the top edge of the model even with the side of the table accomplishes this. If you prefer you can of course place the hooks farther back. The hooks will hold the stand from either end, and facing either direction. There are two versions: The first is mounted using 1/4" VHB tape. Once the part is taped to the table please allow it to sit for 24 hours before loading it with the stand. The second is mounted using four 1/4" or #6 countersunk screws.