LEGOBricks compatible plates
Print Profile(1)
Description
Experimental project
This set of L E G O compatible plates is designed to offer some custom non-official baseplate sizes, featuring L E G O studs sized at 2.450mm, slightly larger than the standard 2.4mm studs found in official L E G O pieces. While L E G O studs are manufactured with precise tolerances using methods like injection molding, 3D printing can introduce small variations based on printer and filament.
The model is optimized for Bambulab A1 Mini with Overture PLA Matte white, using an X-Y contour compensation of 0.05mm for the best fit.
I recommend printing a small test piece to ensure your figurines fit securely. If the fit is loose, increase the X-Y contour compensation; if too tight, decrease it or set it to 0.
AVAILABLE SIZES
- 2x2
- 2x4
- 2x8
- 2x10
- 4x4
- 4x6
- 4x8
- 4x10
- 5x5
- 6x6
- 8x8
- 10x5
- 10x10
- 15x5
- 20x5
- 20x10
- 20x15
- 20x20
PRINT RECOMMENDATIONS
- level your bed
- do not remove the print from the plate while it still warm
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (107)