Dead by Daylight Dramaturgie Survivor Perk HF
Print Profile(0)
Description
Project: Dead by Daylight Dramaturgo Perk.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 200x112.5mm in size (not actual size)
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.6mm and the Actual Depth is 2.2mm
Filaments Used:
PLA BambuLab Matte Charcoal Transmission Distance: 0.6
PLA BambuLab Matte Lilac Purple Transmission Distance: 2
PLA BambuLab Basic Blue Gray Transmission Distance: 3
PLA Overture Purple Transmission Distance: 1
PLA BambuLab Basic Jade White Transmission Distance: 5
This print uses 5 unique filaments
Swap Instructions:
Start with Charcoal
At layer #8 (0.72mm) swap to Lilac Purple
At layer #12 (1.04mm) swap to Blue Gray
At layer #13 (1.12mm) swap to Purple
At layer #17 (1.44mm) swap to Lilac Purple
At layer #20 (1.68mm) swap to Jade White for the rest.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)