打印耗材色卡 Filament Sample Card

打印耗材色卡 Filament Sample Card

Boost
345
723
117

Print Profile(5)

All
X1 Carbon
P1S
P1P
X1
X1E
A1

材料样本卡 v3 (带收纳盒,添加适配gridfinity的较短版本)
材料样本卡 v3 (带收纳盒,添加适配gridfinity的较短版本)
Designer
8.8 h
6 plates
4.8(68)

0.2mm layer, 4 walls, 100% infill
0.2mm layer, 4 walls, 100% infill
16 min
1 plate
4.7(10)

0.2mm layer, 5 walls, 30% infill
0.2mm layer, 5 walls, 30% infill
4.9 h
2 plates

Crystal Lid 0.2mm layer, 1 walls, 100% infill
Crystal Lid 0.2mm layer, 1 walls, 100% infill
3.9 h
2 plates
Click to see more

Boost
345
723
117
8
970
1.9 k
Released

Description

层高0.1,首层0.1, 100%填充打印

标签区域尺寸为30mm*40mm,2mm圆角

 

原始文件中有F3D文件,可以使用Fusion360进行二次创造

 

色卡本身需要需要使用0.1的层高,起码要保证首层是0.1层高,100%填充,收纳盒对打印配置要求不高,默认即可,盖子推荐使用透明PETG材料打印

 

为了适配gridfinity,添加了一个长度更短的版本,这个版本的收纳盒附带了gridfinity的模块,底部可以预留了4x2mm的磁铁的槽位,如果不需要这个模块,也可以将它移除

 

 

0.1mm layer,0.1mm first layer,100% infill

 

The label area size is 30mm*40mm with 2mm rounded corners

 

Click the Raw Model Files button to download the F3D file, Edit with Fusion360

 

The color card itself needs to use 0.1 height, at least to ensure that the first layer is 0.1 height, 100% filled, the storage box has no high printing configuration requirements, the default can be used, the lid is recommended to use transparent PETG material printing

 

To accommodate gridfinity, a shorter version has been added that includes a gridfinity module with a slot for a 4x2mm magnet in the bottom, which can be removed if the module is not needed

 

Comment & Rating (117)

Please fill in your opinion
(0/5000)

Boosted
Print Profile
材料样本卡 v3 (带收纳盒,添加适配gridfinity的较短版本)
Short version printed well with California PETG Matte Red. .1 and .2 are so close that it almost looks like there is no difference.
The designer has replied
0
Reply
First layer height must be 0.1
(Edited)
1
Reply
Boosted
Replying to @qiqiji :
Understood, especially since your model description says "0.1mm layer,0.1mm first layer,100% infill". I printed with designer's profile in Bambu Handy, so I'm not sure what happened that would cause the print to not have 0.1mm layers. I think the issue is that the object doesn't have an "initial layer height" setting, while global setting does.
(Edited)
0
Reply
Replying to @gcheung55 :
Hi, I'm not the designer, but I check the designer's profile for you on Bambu Studio and it is totally fine, Maybe Bambu Handy mess it up. I Notices the global setting is 0.2 layer height, and the card itself has some seriously overrides, for example, layer height and first layer is set to 0.1, and I found an option can be easily ignored, it's called bottom shell layers (in Strength Tab), it's must be set to 1 layer too. Maybe you should double check those settings :)
(Edited)
1
Reply
Print Profile
材料样本卡 v3 (带收纳盒,添加适配gridfinity的较短版本)
works great
4
Reply
I made a nice looking transparent lid profile, try it out if you got transparent PETG :) https://makerworld.com/models/70155#profileId-230947
(Edited)
3
Reply
Print Profile
材料样本卡 v3 (带收纳盒,添加适配gridfinity的较短版本)
Worked wonderfully. I used the phememo 221 with the 40mmx30mm tags for the labels. This is the "short" infinity version. I suspect I will now have a new hobby cataloging filament. Thanks for the great design and idea.
(Edited)
2
Reply
Print Profile
材料样本卡 v3 (带收纳盒,添加适配gridfinity的较短版本)
完美
1
Reply
Print Profile
材料样本卡 v3 (带收纳盒,添加适配gridfinity的较短版本)
Very useful, thank you
1
Reply
Print Profile
材料样本卡 v3 (带收纳盒,添加适配gridfinity的较短版本)
My favorite samples, will be adding labels to them.
1
Reply
Nice!
0
Reply
Print Profile
材料样本卡 v3 (带收纳盒,添加适配gridfinity的较短版本)
Nice print, good detail. I opted to write my own text, so without a label. O thing to be careful about is that the first layer is 0.1mm, so remove it very slowly or allow the plate to fully cool before removing the sample.
0
Reply
Great print. Thanks!
0
Reply