ladybug on leaves Hueforge
Print Profile(1)
Description
Project: coccinella
Here you can find all my HueForge creations and frame for 130x130mm , https://makerworld.com/en/@MicheleMM3D/collections/503504
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.32mm
The Model is 150x150mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2mm
Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic BambuLab Green Transmission Distance: 2
PLA BambuLab Basic Jade White Transmission Distance: 5
PLA BambuLab Basic Red Transmission Distance: 4
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #8 (0.72mm) swap to BambuLab Green
At layer #12 (1.04mm) swap to Jade White
At layer #23 (1.92mm) swap to Red for the rest.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (8)