Support Removal Test - No More Stuck Supports! - Free 3D Print Model

Search models, users, collections, and posts

Uncle Jessy

3D Printer>Test Models

IP Report

Print Profile(2)

All

P1S

P1P

X1 Carbon

X1E

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

A1 mini

Single build plate with Multiple Top Z distances

7.5 h

2 plates

4.9(171)

4 build plates with Multiple Top Z distances

9.2 h

4 plates

4.9(29)

Open in Bambu Studio

Boost

1003

2469

236

136

5.9 k

2 k

Released

Description

I needed an easy way to test my support settings when it comes to actually removing the supports from your prints. Especially when they are difficult to remove.

This test print is primarily for you to test the different values / results of your Top Z Distance setting in your Slicer Support Settings.

There are individual STL files that correspond to different values you can set or a Blank Option.

There is also a .3mf file with the values preset for you. You can simply swap to your printer profile and carry over the support values.

This model also works great for testing Grid, Snug, Organic & Tree Support options.

Here is the model in action and some of the wild results I was seeing by using different types of PLA

This model was designed in Shapr3D on my iPad

Comment & Rating (236)

@kitkattimtam

Print Profile

Single build plate with Multiple Top Z distances

easy to print and its all presented and ready to go

@user_868835978

Excellent model for filament adjustment 👍🏻

Show original

@Potato_Master

Print Profile

Single build plate with Multiple Top Z distances

came out great. it really helped!

@DenoD

Print Profile

4 build plates with Multiple Top Z distances

great way of testing!

@ChivasTR

Boosted

Hello friends, which one is better between 20 and 30?

@Wogod_globally

Hope for a 0.2 nozzle version

Show original

@bloodsteyn

Boosted

Man is doing God's work here.

@Anansidespin

Horrible test, wastes a TON of filament for no reason, 2 models per test is really not needed. The design has way too much volume for no reason. Nope, this ain't it uncle jessy

@rodstar

unnecessary comment You can share and simplify the model as you wish

Show original

@Anansidespin

Replying to @rodstar :

Well the base settings that clearly everone seems to use are flawed and use too much filament ant time, this can be tested with 1/4 of the filament and 1/4 of the time with a different model.

@Jumbo_Jym

Replying to @Anansidespin :

Great, when can we expect this model that achieves all the test parameters this one does with 1/4 of the filament then? You have 0 published models considering you are such an expert that seems strange.

@user_1251544031

Print Profile

4 build plates with Multiple Top Z distances

@cavanaug

Boosted

Ive learned the hard way thru ruined prints with stubborn support. If you are printing anything with significant amount of support, then you MUST test your filament, nozzle & layer height with this model. Its only 100g and far better than a ruined print. I am only 4 months into my 3d printing journey, but this has become one of go to tools when using any filament beyond basic PLA. For me, anything in PETG or other filaments infused with CF/GF this is particularly important. Thanks for this model!!