Search models, users, collections, and posts
GIF
Print Profile(2)
0.12mm layer, 2 walls, 100% infill
Designer
12.3 h
3 plates
0.12 and 0.2 mm layer, 2 walls, 100% and 10% infill
10.2 h
3 plates
Open in Bambu Studio
Boost
621
1286
43
40
714
217
Released
Description
Content has been automatically translated.
AAA battery-powered light box (X3)
A slide switch controls the white light while the tilt sensor activates the red LEDs when the box is flipped over
The Stranger Things plate must be printed with 100% infill at 0.12mm. For the box, 15% is sufficient at 0.20mm
I used a white LED strip and a multi-color one, a slide switch, a tilt sensor
The AAA battery holder is a model by enif from which I cut one end (the model without the 3MF is already the correct length)
available here https://www.thingiverse.com/thing:941081
metal pieces need to be added to each end to solder the wires
Here is the installation diagram:
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial
Comment & Rating (43)