Predator Jungle Hunter Gauntlets

For Bambu users, the parts have all been split, scaled and orientated for the best printing experience and results. I have also attached the files for the gauntlets as whole pieces which can be downloaded as STLs.

PLEASE NOTE, this model is scaled based off a full size predator and are therefore quite large. If you are printing for costume and not just display, it is recommended to scale down to your personal preference before printing.

I personally used 0.2mm layer height with 5% infill to save on time and material. You will need very good bed adhesion to print a few of these parts, everything printed successfully first try for myself with a bit of print bed glue on the standard textured PEI plate. My guess is anyone who has the new super tack plates will print these parts with ease.

A great technique I personally use for build plate adhesion is to spread some glue stick across the whole plate, run the plate under hot tap water and then smear the glue evenly across the whole plate with a paper towel. I have had amazing print results with this method time and time again when printing difficult objects.

I have now modeled a blade for the right gauntlet which I have uploaded as a remix to this model.