Type 055 Destroyer 101-110 1:2000

If you are interested in my other designs, you can browse my homepage or collections  IKEA Skadis and accessories   Modular storage box  1:2000 boat model 1:700&1:350&chibi versions Daily necessities 3D printing related Toy

Here comes the Fujian aircraft carrier's "sword-wielding escort"

The first ship of the Type 055 destroyer, Nanchang (hull number 101), is 183 meters long, 22 meters wide, has a full load displacement of over 12300 tons, and a maximum speed of 32 knots

It is equipped with 112 vertical missile launch cells, capable of launching cruise missiles, anti-ship missiles, anti-aircraft missiles, and anti-submarine missiles

The model is 90mm long, with a scale of approximately 1:2000

2026.5.24

Ten Type 055 destroyers are now in service. This time, I added the 109 Dongguan and 110 Anqing to the print profile. Their hull shape is the same as the last four ships, only the hull numbers differ

2024.12.12

Looking back at the previous Type 055, I found that the hull shape was not very accurate (including the bottom of the ship), so I made corrections

Although called a revision, it's almost like a complete redesign. I've also added many details, enough to support printing at double the size

As you can clearly see from the image below, the previous ship was too bulky, while the revised version has a more elegant hull shape😁

This time, I have updated the hull numbers for all 8 active Type 055 ships. The different smoke stacks of the last four ships are also represented. Print them all for 8 times the fun, or you can choose your favorite one to print

Below are the hull numbers and names. See if your hometown ship is among them

101 Nanchang 102 Lhasa 103 Anshan 104 Wuxi

105 Dalian 106 Yan'an 107 Zunyi 108 Xianyang

I have replaced all previous print profiles, including the ship's bottom. The previously released separate ship bottom and dry dock models will be delisted

2024.11.03

Added a magnetic base and stand for the Type 055 (now delisted)

Type 055 Nanchang Ship Bottom 1:2000 from redghost13 - MakerWorld

Two 4X2 magnets can be installed at the bottom. With my previous Fujian aircraft carrier, the "fleet on the fridge" now has two ships

The 1:2000 scale ship is truly tiny. When modeling, I considered using a 0.4 nozzle to print more details. Many dimensions on the ship have been optimized

This time, both single-color and multi-color versions are provided. The multi-color version currently uses only two colors, light gray and gray

In the future, I will continue to create other ships, gradually expanding this fleet. I hope you all like them