Labyrinth Pinball Golin Gate

Labyrinth has a very unique layout on the bottom left-hand side of the playfield. I was getting a lot of balls that would come out of the ramp eject, hit the right flipper, bounce to the left, and run up and out the outlane and drain. It was becoming quite frustrating so I designed a one-way gate, the “Goblin Gate”, to prevent this. Combined with the Didymuys ball save helper this mod will make the game way more fun, but it will make it a bit easier. However, this is totally reversible.

To install the gate you will need the following.

• 2x Bumper posts https://www.marcospecialties.com/pinball-parts/02-4036-1
• 1x Bumper post rubber ( either standard or Sten thin style): https://www.titanpinball.com/index.php?route=product/product&product_id=52
• 2x 8/32 screws.
• If you want to omit the 3d printed gate, this metal one will work from Marco Specialties 

To install, simply remove the two mini-posts from the bottom of the playfield and swap to the bumper posts. Ben the gate mount and snap the door in. Screw the gate on and enjoy!