kenkamm

cover

IMG_2411.jpeg

IMG_2410.jpeg

Screenshot 2024-10-12 at 7.12.30 AM.png

plate_1.png

plate_2.png

plate_3.png

plate_4.png

2024-10-12_de8f77bf035e7.png

Everything is printed without supports.I used 0.2 layer height but 0.28 or something like that would work fine.I used 4 walls and between 20 and 25% infill to make it strong.I used PLA for the Base, Top, and Shaft and TPU for the pads.You need 4 4x20mm bolts for the shaft and 16 3x10mm bolts for the pads.

0.2mm layer, 4 walls, 20% infill

Swiveling stand for the Traxxas XMaxx XRT. May fit other large scale RC cars but I&#39;m not sure.

RC Car Stand for XMaxx or XRT

Askthedads

IMG_2703.JPG

Screenshot from 2026-02-02 11-22-19.png

IMG_2702.JPG

RC Car Stand (X-Maxx / XRT)

ASIA

Print Profile(1)

Description

Comment & Rating (85)

License

Remixes (1)

Related Models