Trophy Ridge React One Pro sun shade.

I give to you, my very first 3D model.

I have adapted an existing model which can be found here Axcel AV41 scope front sun blind by ChudoShtukaV3D - Thingiverse.

First, I removed the screw thread section, the thread on the scope is far too small to be 3D printed, I tried and it just chewed up the treads on the 3D print when i tried to attach it.

Then I created an SVG of the lens retainer shape and used it to cut out a section inside the Axcel AV41 scope sunblind model so that the trophy ridge lens retainer fit it perfectly, I then added a small lip inside so that the lens retainer would not just slip out of the sun shade, printed it off, inserted the lens retainer ring and screw the whole thing onto my scope housing and it was perfect.

Note: I did have to use a second rubber gromit between the lens and the ring as the lens rattles around ever so slightly but i'm sure you could eliminate that by cutting off a very small section of the rim that lines up the with scope. Plus, I used PLA for my first one but I recommend something a little tougher such as PETG or ASA.

Feel free to use, share or adapt the model to your liking and thank you for checking out my first ever model.

Credit to Axcel AV41 scope front sun blind by ChudoShtukaV3D - Thingiverse

https://creativecommons.org/licenses/by/4.0/