MTG Manacrypt red Ixalan Hueforge 107x150
Print Profile(1)
Description
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 107.4x150mm in size
You may print at higher layer heights below the Min Depth of 0.4mm
The Max Depth is 2.1mm and the Actual Depth is 2.2mm
Filaments Used:
PLA BambuLab Basic Jade White Transmission Distance: 2
PLA+ Sunlu Orange Transmission Distance: 5
PLA BambuLab Basic Red Transmission Distance: 2
PLA+ Sunlu Black Transmission Distance: 0.6
This print uses 4 unique filaments
Swap Instructions:
Start with Jade White
At layer #12 (1.04mm) swap to Orange
At layer #17 (1.44mm) swap to Red
At layer #21 (1.76mm) swap to Black for the rest.
You can use any filament manufacturer.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (2)