Anti Theft Protection (for Zippers)

This is a definite must need that all should have whenever your navigating through a busy airport or walking through a crowded street. This is a super fast an easy print that can be easily done and is definitely a must need beginner print!

This is a really easy print that can be printed very fast, if you want more accuracy for the print so that the walls don't melt together I wouldn't speed it up to fast. More tips below the print settings.

Make sure to check out my patreon page! If you join for free you can receive (free) exclusive models only on my patreon! Also have access to more updates, polls, requests, and many other things! My Master Printer Patreon

Make sure to check out this collection for more travel essential models! Enjoy! Travel Essential Models Collection

Print Settings:

Infill: 15%-75%

Infill Type: Gyroid

Supports: NO

Brim: NO

Filament: PLA or PETG or ABS

If your printer is not calibrated enough or is a bit older make sure to use this setting. Go into Prusa slicer then navigate to ‘print settings’ then find ‘advanced.' Once you find that scroll down to ‘slicing’ then 'X/Y Compensation. Once you get there change it to -0.1 or -0.15. If for some reason your printer is still melting the walls into each other change it to -0.2 or -0.25 at the most. Hope that helps enjoy! 🤓

Enjoy this awesome model!