Hueforge Game Poster - Super Mario World -
Print Profile(1)
Description
Super Mario World
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 140x200mm in size
Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Blue Transmission Distance: 4
PLA BambuLab Basic Brown Transmission Distance: 2
PLA BambuLab Basic Red Transmission Distance: 4
PLA BambuLab Basic BambuLab Green Transmission Distance: 2
PLA BambuLab Basic Yellow Transmission Distance: 6
PLA BambuLab Basic Jade White Transmission Distance: 5
This print uses 7 unique filaments
Swap Instructions:
Start with Black
At layer #14 (1.2mm) swap to Blue
At layer #18 (1.52mm) swap to Brown
At layer #20 (1.68mm) swap to Red
At layer #22 (1.84mm) swap to BambuLab Green
At layer #25 (2.08mm) swap to Yellow
At layer #30 (2.48mm) swap to Jade White for the rest.
*Two optional frames possible (use the one for 140mm X 200mm)
- One with the hueforge inserted from the front without losing the outline border (but the border frame seems smaller)
https://makerworld.com/en/models/689118#profileId-617795
- The second with the hueforge inserted from the back with a loss of less than 1mm on all sides of the image (border a little bigger than the first)
https://makerworld.com/en/models/689107#profileId-617786
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (2)