Search models, users, collections, and posts
Print Profile(3)
0.1mm layer, 1 walls, 100% infill
Designer
2.8 h
1 plate
0.1mm layer, 1 walls, 100% infill DISABLE DINAMIC FLOW
2.6 h
1 plate
0.1mm layer, 1 wall, 100% infill, pendant
2.3 h
1 plate
Open in Bambu Studio
Boost
254
639
123
60
1.4 k
775
Released
Description
Content has been automatically translated.
This is a transparent cube printed following the Printing tips for transparent PETG | Bambu Lab Wiki guide, with a clear heart visible in the center of the cube.
Notes
- At the bottom, there is a 0.4mm base to prevent fogging of the bottom surface when removing the model from the printing plate. It is best to use PLA material for the base. If you are confident with your print plate, you can also delete it.
- If using AMS to print, please ensure the purge volume > 600. If you do not have AMS, you can also switch materials by setting a pause in the slicing software. Remember to purge a bit more.
- Before printing, it is best to perform a test according to the wiki above. Pre-drying the PETG filament will have a good improvement.
- Please do not enable flow calibration.
- FD printing transparent effects is not easy, please treat it as an interesting attempt.
Other Crystals
Follow me, there are other beautiful crystals on my homepage.
License
This user content is licensed under a Standard Digital File License.
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (123)