Velux Hook to screw on to an extension pole - Free 3D Print Model

Search models, users, collections, and posts

Steve Bickle

Household>Other House Models

IP Report

Print Profile(2)

All

A1 mini

P1S

P1P

X1 Carbon

X1E

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.2mm layer, 3 walls, 15% gyroid infill

Designer

1.2 h

1 plate

4.9(59)

Velux Hook Remix with Hook for "grabbing" Window Blind cords

59 min

1 plate

5.0(2)

Open in Bambu Studio

Boost

232

695

129

954

654

Released

Description

Velux charge around $45 for a hook on a telescopic pole. I have a telescopic pole from my paint roller which had a bodged up end I made (a bolt through the screw on splined wedge and much protective tape, nasty), now I have this nicer 3D printed one.

This is the 4th iteration of my model, it finally has sufficient strength and a good fit on the threaded attachment. I have added the STEP CAD file if you wish to remodel for a different fit.

The model it printed on its side so that any tugging to open the window is not pulling apart layers. Though on its side internal thread prints nicely without any supports.

For a cost effective extension pole that will fit this try:
UK https://www.amazon.co.uk/ProDec-Contractor-36-Extension-Roller/dp/B09H3HCMFP
US https://www.amazon.com/ProDec-Contractor-36-Extension-Roller/dp/B09H3HCMFP

Boost Me (for free)

If you find this model helps you wrangle your Velux windows, please consider giving it a Boost to get it shared more widely.

Comment & Rating (129)

@user_1680590101

Print Profile

0.2mm layer, 3 walls, 15% gyroid infill

worked perfect with my paint roller pole

The profile uploader has replied

@SteveBickle

Nice, I'm glad to see that is works for you

@3DPrintWonder

Print Profile

0.2mm layer, 3 walls, 15% gyroid infill

Good design. I adapted it a little for a 22mm wooden handle and put 2 screws in.

The profile uploader has replied

@SteveBickle

Nice, thanks for the stars

@MMeffert

Print Profile

0.2mm layer, 3 walls, 15% gyroid infill

I was able to cut out a V section in the hook to make two smaller prongs that worked for my use case of a pull down attic stairs.

(Edited)

The profile uploader has replied

@SteveBickle

Nice, that sounds good. Thanks for the Star rating

@pcrov

Boosted

Print Profile

0.2mm layer, 3 walls, 15% gyroid infill

Printed in PETG. Nice snug fit on my Wooster. Thank you for sharing it!

The profile uploader has replied

@SteveBickle

No problem, thanks for the Star rating

@gregpoe63

Print Profile

0.2mm layer, 3 walls, 15% gyroid infill

scaled up to 116% to fit my paint pole

The profile uploader has replied

@SteveBickle

Looks like it came out nicely. If that size pole is common, please add you print profile for others to use.

@mustbeblack

Print Profile

0.2mm layer, 3 walls, 15% gyroid infill

Easy to print Works wonderfully I would need to scale it up though to fit a broom handle

The profile uploader has replied

Show original

@SteveBickle

Thanks for the Star rating, I hope it works for you scaled up.

@zerodev

Boosted

Print Profile

0.2mm layer, 3 walls, 15% gyroid infill

awesome and functional design, strong and reliable.

The profile uploader has replied

@SteveBickle

Thanks for the stars, it was the 4th version, making this strong enough taught me a lot.

@cIPA28

Print Profile

0.2mm layer, 3 walls, 15% gyroid infill

Perfect 😎

The profile uploader has replied

Show original

@SteveBickle

Thanks for the stars, I hope it works well for you. (also love the table cloth)

@user_1222125181

Print Profile

Velux Hook Remix with Hook for "grabbing" Window Blind cords

Printed in PETG. I would add more infill as I was using to pull down a roof hatch locking bar.....but for blinds it should be fine.

(Edited)

@Rasmussen

Good design, fitted perfectly and printed well.

License

This user content is licensed under a

Creative Commons Attribution-Noncommercial-Share Alike

Remixes (1)

Velux Hook to screw on extension pole (EU/IT) Ø22

ZeroDev

197

Related Models

Coffee Clip with Screw Cap

H2Jack Concepts

18.9 k

5 k

Ikea Skadis Hooks

Marc Elbichon

24.8 k

6.3 k

Board Hook V1

Mohammad AD

20.1 k

6 k

Gift Box w/ 120 Screws

Mechengg

24.7 k

6.9 k