sonicPulse

cover

coin-sorter.jpg

plate_1.png

plate_2.png

plate_3.png

plate_4.png

plate_5.png

I_Epic

IMG_4171.JPG

This is a print profile for X1,P1, and regular A1 printers. I am uploading it because, as of writing, there isn&#39;t one already available for the larger Bambu printers, and I prefer a 0.2mm layer height over 0.28mm anyway. I bumped up the infill to 20% for this one too, because I know the coins shaking around could cause damage if the layers aren&#39;t strong enough.

0.2mm layer, 2 walls, 20% infill

5794192632614864086.jpg

5794192632614864085.jpg

5794192632614863948.jpg

5794192632614864084.jpg

0.28mm layer, 2 walls, 15% gyroid infill, slowed down 1st layer speeds for better adhesion

0.28mm layer, 2 walls, 15% gyroid infill

6SpeedSRT

IMG_2674.jpeg

IMG_2672.jpeg

0.8mm nozzle, 0.4mm layer, 20% infill

0.6mm nozzle, 0.3mm layer, 20% infill

First, fill Coin Sorter Tray 1 with your coins. Next, cover Tray 1 with the Coin Sorter Lid. Give the Coin Sorter a good shake...  and keep shaking! When you&#39;re done. Tray 1 will have quarters. Tray 2 will hold nickels. Tray 3 will contain pennies.  Tray 4 will be filled with dimes.

Coin Sorter

Boka

IMG_8761.jpeg

硬币分类器-台灣版

Coin Sorter - Taiwan Version

coin_2024-Oct-14_10-27-00AM-000_CustomizedView1118408594.png

Coin Sorter - Australian version

ASIA

Print Profile(4)

Description

Comment & Rating (389)

License

Remixes (6)

Related Models