Quest 2 & 3 Cable Guide Clips for BoboVR M2 & M3

• ⚠️ Important Notice – Please Read Before Printing an AMS Riser

  Due to a license change by benlevi, the original creator of my AMS Riser V2, I am no longer able to update the description of this model. I have already reached out to Support about this issue, but they were not able to help me – because of the license change, this situation is simply how it is, there is nothing more I can do on my end to modify the listing.
   

  I'm currently receiving an increasing number of complaints from users who have printed the Riser V2 for the Bambu Lab P2S or X2D

  
  ⚠️ Compatibility – please double-check before you print:

• Riser V2 → P1S, P1P, and X1C

• Riser V3 → P2S and X2D

  Printing the wrong version will result in fitment issues, as the printer dimensions and mounting points differ between generations.

  Thanks for your understanding, and sorry for any confusion caused by the locked description – my hands are tied here, but I hope this notice helps clear things up!

  
   

This is my Design for 2 very useful Clips for the BoboVR M2 & M3 Headstrap.

The upper Clip is for a better Guide and storage if not in use for the BoboVR Cable.
The second Clip is for both, the BoboVR Cable and the Link Cable if in use.

I strongly recommend printing in TPU Shore 95A or an simmilar Material

The first (upper) Clip dont need to be cutted.

You only have to remove the small Pad an then pull over like you see in the picture (arrow)


The second clip needs to be cutted after printing in the way you see on this picture.
Watch your fingers!
After cutting the Clip you can Pull the Clip over like you can see in the second picture.
Even though it is cut it has a strong hold!

happy printing

A heartfelt thank you to the entire Makerworld community! Your creativity, continuous support, and inspiring collaborations mean the world to me. It’s amazing to be part of such a dedicated and innovative group. Let's keep making great things happen together!