Aloris CA QCTP Dial Indicator Tool Holder
Print Profile(2)
Description
This is a dial indicator holder to fit a CA size Aloris QCTP. The indicator I used is a Accusize .0005" 0-1", but any indicator with a 3/8" shank will fit. The hole is sized to be a snug fit on the shank, so no tools are needed for installation.
The adjuster is an Aloris CA-HA, which uses 1/2"-20 threads. The hole is sized for tapping, so you can tap the hole after printing. Alternatively, you can print the profile without the adjuster hole. In that case, you would set the height manually each time, but you would be gain the ability to flip the indicator and use it to measure the face of a part as well as the diameter.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (19)