Search models, users, collections, and posts
R2D2 12-wire splip ring interface
IP Report
Print Profile(1)
0.2mm layer, 4 walls, 40% infill
Designer
37 min
1 plate
Open in Bambu Studio
Boost
21
46
2
1
19
1
Released
Description
General
Here is an adapter to mount the Fused 12 Wire Slipring Interface from Printed-Droid to the dome of your R2D2 (or other droids) with screws.
Simply print out the file, melt in four fusible sleeves and fix the board with four M3x6mm screws.
Ideally, first drill two holes in the desired position in the dome (I used the dome inner ring) and then fix with two suitable M3 (variable length) screws.
Part List
| Type | Quantity | Used for | Link |
| Fused 12 Wire Slipring interface | 1 | Fused 12 Wire Slipring Interface RJ45 (2022) - Printed Droid Shop (printed-droid.com) | |
| M3x6 mm Pan Head Screw | 4-6 | Fixing the board to the pressure part and the dome inner ring | |
| M3x5.7 mm Threaded Insert | 4 | Fixing the board to the printed part | ruthex M3 Gewindeeinsatz |
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial-Share Alike
Comment & Rating (2)