Dragon Playing with Pearl Feng Shui Ornament

Dragon Playing with a Pearl, Feng Shui Ornament

Dimensions: The model's default height is 70mm and width is 85mm. You can scale the size as needed for printing. Scaling requires setting in desktop slicing software.

Supports: Supports are pre-set, easy to remove. The layer height is 0.2mm. The model can be printed directly using the mobile app.

For finer printing results, you can set a lower layer height in the desktop slicing software (when a pop-up appears, remember to select "Use Modified Value"). The printing time will increase accordingly.

Filament:

The actual image uses Bambu PLA Silk Golden 13401 Click to purchase

Feel free to leave a comment if you have any questions.

3D Printing Precautions
In my experience, the following points should be noted for daily printing:
1. Regularly clean the printing plate! If possible, it is recommended to wipe the printing plate with a damp towel before each print to reduce the occurrence of first layer adhesion issues or detachment.
2. Pay attention to drying the filament. Use AMS to promptly replace the desiccant to reduce stringing.
3. Upgrade desktop slicing software and mobile apps to the latest version. Update the printer firmware in a timely manner.
 

For more questions and notes, you can consult customer service or check out the Bambu Official Wiki:
Bambu mobile app (Bambu Handy) printing tutorial Click to view
Common questions about filaments and accessories Click to view
Bambu desktop slicing software (Bambu Studio) printing tutorial Click to view