A1 Mini - Filament guide with adjustable height - Free 3D Print Model

Search models, users, collections, and posts

akidone

3D Printer>3D Printer Accessories

IP Report

Print Profile(1)

All

A1 mini

P1S

P1P

X1 Carbon

X1E

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.2mm layer, 2 walls, 15% infill

Designer

39 min

1 plate

4.9(20)

Open in Bambu Studio

Boost

320

267

141

Released

Description

The best solution for side loading your filament!

I know thats a bold statement, but i already tried many other solutions, but finally decided to make my own version.

It simply screws into the back of your beloved A1 Mini with the screws for the original spool holder. Then you just press the round PTFE Holder into your desired height and rotate it as it fits you best. I decided to glue the round part in place, just to make sure it is bulletproof.

Print was done using Bambulab PLA and yeah - i like green accents :-)

Boost Me (for free)

You found this model useful? If so, please consider giving me a boost - It would mean a lot to me!

Also i would like add that these prints had made my life so much easier:

Low friction spool holder by rogerquin

https://makerworld.com/en/models/550709

A1mini Spool Holder by Marcelimm

https://makerworld.com/en/models/514429

A1 Mini cover for PTFE Tube Connector holder by D4V3IG

https://makerworld.com/en/models/452978

Comment & Rating (28)

@Kawa

Boosted

Print Profile

0.2mm layer, 2 walls, 15% infill

just perfect - thank you!

The profile uploader has replied

@akidone

that filament looks freakin amazing!

@TiaoAK47

Boosted

Print Profile

0.2mm layer, 2 walls, 15% infill

Excellent print. Use it to run TPU from a dryer to my A1 Mini.

@LKal

Print Profile

0.2mm layer, 2 walls, 15% infill

Good model. I cut mine in Bambu Studio since I needed only one hole for mounting.

@user_394121155

I haven't downloaded or printed it yet, but are you sure it works? For me it looks like, as if, when you would try to print a 15x15x15cm vase or anything that size, the ptfe tube would be in the way, crossing from the z-axis over to the extruder, when the bed is pushed backward to print a piece of it in the front of the bed... so nothing for me at the moment

The designer has replied

@akidone

You need to use the PTFE tube that came with the A1 Mini, as this is long enough to not cause any problems. Printed many bigger prints without ever experiencing any problems.

@user_394121155

Replying to @akidone :

Thanks for your rely... Will try it out :)

@user_540736256

Print Profile

0.2mm layer, 2 walls, 15% infill

Great idea, works very well

Show original

@Andy_DO1ABL

Boosted

Vielen Dank

@BigBubatz

Print Profile

0.2mm layer, 2 walls, 15% infill

super

@davidmccabe317

Boosted

Works awesome for me. I pull filament straight out of a dryer. Thank you!

@user_3838071159

Print Profile

0.2mm layer, 2 walls, 15% infill

simple to print and quick

@domi_3D

Print Profile

0.2mm layer, 2 walls, 15% infill

Perfect, prints without issues

Show original

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.