TEC-9 / T-15 water toy gun

中文站：https://makerworld.com.cn/zh/@QYM3D

MOD：【T-15 Disc Shooter】https://makerworld.com/zh/models/497751

【T-10 Water GUN】：https://makerworld.com/zh/models/896448

Filament:  BambuLab PETG HF

——————————Updated：TEC-9 Water GunV2.0 ——————————

Upgraded TEC-9 water gun based on T-15 MOD, with simpler installation and quick magazine replacement.

Please refer to T-15 water gun for the assembly process。

——————————Updated：T-15 MOD ——————————

Upgrade :

1. New appearance MOD: T15
2. Upgrade the quick release magazine for easier reloading
3. Add expandable magazines and magazine couplers to enhance firepower sustainability(need a BT2.6 screw)
4. Enhance trigger force and reduce accidental touches

Tips:
1. Default 15 ° tree support
2. 3 layers of walls are used for the magazine/drum, gun body, and other parts, with 30% cube filling to prevent water leakage
3. Pulling the handle requires an M2.6 * 8 hex socket self tapping screw, while an H1.5 hex socket wrench can be used with the Bambu printer's built-in wrench
4. Install trigger first, then install micro switch
5. Use the included cutter to cut the rubber tube. The short tube is used to connect the water gun movement to the gun body, and the long tube is used to fill the magazine with water
6. Please ensure that the water gun test is normal before cutting the consumables thread that fixes the gun body, otherwise you may find it difficult to disassemble the consumables again due to the inability to remove them.

7. If the battery cannot be fully inserted into the battery compartment, please bend the switch pin.

TEC-9 Assembly video：

Cutting machine assisted cutting