collapsing wide blade of someone - Free 3D Print Model

Search models, users, collections, and posts

VILLS_

Props & Cosplays>Other Props & Cosplays

IP Report

Print Profile(1)

All

P1S

P1P

X1 Carbon

X1E

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.2mm layer, 2 walls, 15% infill

4.1 h

2 plates

4.5(8)

Open in Bambu Studio

Boost

134

221

405

104

Released

Description

The Originium sword of Texas

assembly required, need 5 M3X12 threaded bolts, gluing works as well

Comment & Rating (16)

@user_3003328464

how exactly is this supposed to go together???

@jaredlight0

also why do you need to use the bolts? im just curious. maybe add instructions for assembly

The designer has replied

@VILLS_

Hi jaredlight0, thanks for the attention; I apologize for any inconvenience caused by hardwares; the bolts are there so the prop can be disassembled and maintained properly; you can tap the bolts into the bolt holes directly to fasten them; they are really optional because the they secures the end cap on handle, you can do the same thing with double sided tape, epoxy, mount spray or craft glue; hope it answers your questions

@user_4202093906

Print Profile

0.2mm layer, 2 walls, 15% infill

vert fun

Strength Issue:broke in the first five minutes

The profile uploader has replied

@alby696

It's not a toy… it's PLA… it's normal for it to break… many have printed it without issue

Show original

@pandamaster

what is the other part that is printed with the blade for?

@mothypumpkins

one is the handle and the other is the actual blade, they clip together

@.Nemets.

Print Profile

0.2mm layer, 2 walls, 15% infill

nice fun little model, was going to use it and splice it together with another model for a project but it was a little too bulky for what i was doing. Great model none the less!

@infamousisfpv

can you set up a profile for the bambu mini please 🙏 and thank you I greatly appreciate it

@bsp5150

Print Profile

0.2mm layer, 2 walls, 15% infill

best collapsible sword

@.Nemets.

should the blades be separated and printed in vase mode or can you print them normally? Also have you tested sizing this down at all?

(Edited)

@babypuppy110011

Print Profile

0.2mm layer, 2 walls, 15% infill

@Spetznatz1

Print Profile

0.2mm layer, 2 walls, 15% infill

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.