Sunlu S2 Door / Lid Spacer / Door Vent / Wedge - Free 3D Print Model

Search models, users, collections, and posts

Remixed by

The Kit Card Guy

3D Printer>3D Printer Accessories

IP Report

Print Profile(2)

All

A1 mini

X1 Carbon

P1P

H2C

P2S

H2S

X1E

H2D

H2D Pro

P1S

X2D

A2L

both variants (fast print) 0.24mm layer, 5 walls, 15% infill

Designer

21 min

1 plate

5.0(2)

0.2mm layer, 2 walls, 20% infill

36 min

2 plates

5.0(18)

Open in Bambu Studio

Boost

126

Released

Description

Boost Me (for free)

Summary
For better ventilation and drying of the filament and to achieve shorter drying times, the lid of the Sunlu FilaDryer S2 should be slightly open.
Based on the linked remixes a better fitting accuracy was achieved and the material requirement was reduced by 44%. Less than 30cm of filament is needed to print the low model with 2.5mm lid opening.

Versions
Two versions are available: 2.5mm lid opening ("low") and 5mm lid opening ("high").

Print
Please print in PETG or even more temperature-stable materials.
Print direction as specified in the file (upright).

Do you like my work? I would be very happy if you would support my work on Ko-fi.

Differences of the remix compared to the original

inner shape adapted for a better fitting accuracy
two different height versions designed
width reduced from 30mm to 20mm
rounded some edges

Filament Dust Cleaner

Comment & Rating (22)

@Born2Love

Print Profile

0.2mm layer, 2 walls, 20% infill

Great model!

@user_4223908060

Boosted

Print Profile

0.2mm layer, 2 walls, 20% infill

I like that this model has smaller gap than other models. Works great

@user_465431577

Print Profile

0.2mm layer, 2 walls, 20% infill

works just as expected. lowered the moisture by 30-40%

@JoshR19

Do you think this mod is still beneficial in the model that was fitted with a fan?? I was looking into plugging the filament holes but seeing mods like this are making me rethink my theory.

The designer has replied

@theKitCardGuy

I also have the model with the integrated fan and yes, it is really helpful. To ensure that the Filamant is dried as efficiently as possible, the air humidity must be as low as possible. The feedback from the community and my personal experience is that the air humidity is lower when moist air can escape from the drying room. Either open the drying chamber manually every hour or use a spacer so that the lid remains open a little. This reduces the air humidity and the filament is drier.Translated with DeepL.com (free version)

@Hopp81

Boosted

Print Profile

0.2mm layer, 2 walls, 20% infill

perfect addition, unlike many other variants not too big not too small for permanent attachment to the device ideally suited, thank you

Show original

@MamphofMischief

Boosted

Print Profile

0.2mm layer, 2 walls, 20% infill

Tiny little tools of epicness. Has made the S2 much more effective. I also appreciate the size options greatly. I usually dry my filament a couple hours with the big one, a couple more on the small one, then the last few hours completely closed, and it's been working like a charm! Printed them in PLA, but they've held up to longterm drying of most filament types with no warning issues.

(Edited)