Cute little shark

Cute Cartoon Little Shark

• Exquisite and compact ornament, one-piece printing, perfect for street stalls, a small object for children to play with
• Initial configuration outer contour size 33.2X46.3X37.4mm, can be scaled freely according to your needs

• 40 minutes of rapid printing, printing support is simple and easy to remove, one-piece printing is delicate and easy to shape, 0.16 layer height, good printing effect, it is recommended to print at 100% original speed

• Pay attention to heat dissipation if the printing overhang quality is not ideal! Also pay attention to flow calibration and drying of consumables!

3D Printing Techniques and Preparation Precautions

(Most models published by creators have been tested and can adapt to all models. Many times, printing problems need to be checked to see if your printer and consumables are normal. This is a skill you need to learn when playing with 3D printing. If you have any problems, you can also actively discuss in the comment area. This is also the meaning of building such a community)

I have made some notes below. For more questions, you can ask customer service or you can check the Bamboo Wiki. You can learn a lot therePrint Quality and Solutions | Bambu Lab Wiki

• Make sure the printing plate is clean. It is recommended to clean the printing plate regularly!The oil residue on your hands after touching the printing panel will lead to a significant decrease in printing adhesion. At the same time, the debris from previous printing and the tiny residue of the printed object will also affect the printing quality of the first layer, thus reducing the yield.
• Pay attention to the drying of consumables, which will greatly affect your printing quality and printing experience! Consumables will inevitably become damp after being placed for a long time. If stringing occurs, it is recommended to consult the manufacturer for drying parameters to dry the consumables. At the same time,most manufacturers' consumables are not dried during production, so the newly opened consumables are still a little damp. It is also recommended to dry them before use.
• Use new manufacturer's consumables, it is recommended to print the first time to calibrate the consumable flow, and modify the calibration coefficient, which will greatly affect your printing quality, and it is also a necessary process to make the new consumable adapt to your printer.
• If you encounter a problem where the printing quality suddenly becomes poor and the yield is low, check if the nozzle is clogged, and you can also try recalibrating the printer.
• Print at the printing speed recommended in the model instructions. Overhang quality is directly related to printing speed.An appropriate speed (too fast or too slow is not good) allows the material to cool and shape more time when it is deposited.
• Set the hot bed and nozzle temperature reasonably according to different materials.Too high or too low temperature will lead to warping, layered deformation or adhesion problems, which will affect the printing quality and success rate.