Search models, users, collections, and posts
Blink Sync Module 2 Plug Mount (UK)
IP Report
Print Profile(3)
Sync Mount - 0.2mm layer, 3 walls, 10% infill
Designer
33 min
1 plate
Strength, 0.20, 6 Walls loops, 25% Gyroid, X1C 0.4 Nozzle
52 min
1 plate
0.2mm layer, 5 walls, 15% infill
33 min
1 plate
Open in Bambu Studio
Boost
102
232
70
39
397
287
Released
Description
Introduction
A mounting solution that allows the UK version of the Blink Sync Module 2 to be stored on top of the USB power plug.
Instructions
- Print the two parts
- Glue the plug mount to the sync module holder using epoxy, CA and activator or similar. There is a recess on the sync module holder to aid alignment. Note that the plug mount can go either way up since the opening for the USB connection is in the centre.
 |  |
- Insert the sync module
- Insert the power plug
- Connect the USB cable, wrapping any excess around
License
This user content is licensed under a Standard Digital File License.
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (70)