Mechanical wing for Dummy 13 - Free 3D Print Model

Search models, users, collections, and posts

Zunge

Toys & Games>Characters

IP Report

Print Profile(1)

All

P1P

P1S

X1 Carbon

X1E

A1 mini

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.16mm layer, 2 walls, 15% infill

Designer

1.8 h

2 plates

3.8(131)

Open in Bambu Studio

Boost

2407

5600

246

3.5 k

1.9 k

Released

Description

Content has been automatically translated.

Show original

Designed for Dummy13, these mech-style mechanical wings are better suited to Dummy13's own design language.

Attention! As the joints are very tight during the initial installation, the connecting rods of the ball joints are very prone to breaking when twisted for the first time. Please be extremely careful when rotating the joints for the first time!

When rotating the joints for the first time, please pay attention to the direction of rotation. Rotating in the direction shown in the diagram below will be safer.

Once you have successfully overcome the first rotation, you can move them freely without worrying about damaging them.

In addition, all the ball joints in the model are the same size as those in Dummy13 itself. You can freely combine them with Dummy13. For example, you can use them as a giant sword to be held in your hand.

dummy

dummy 13

DUMMY 13

Documentation (2)

Assembly Guide (2)

Guide1.png

Guide2.png

Comment & Rating (246)

@user_992631859

🥹 i didn't have 3D Printer but i appreciate this kind of art 😍 its beautiful for Dummy 13 🥹

@user_3563085628

Boosted

wow, no printer but still on the app to spread positivity… <3

@user_3286072281

I respect that 🫡

@AlexW2016

hope you get a 3D printer 🫡🫡

@user_3519193915

Okay let's rip the bandaid - the profile is not well optimized, the build is for Beta Dummy, it weights as much as a dummy 13 and it is overdesigned to a point of absurdity. But it looks cool, please consider remixing/continue working on that model. It screams mech, edgy and Stabby in a way in which it does not deserve to just stay like this (and is very reminiscent of Decepticons or SR 71) Suggestions : remove the fins all together, put the jet(s) in the middle, reduce the amount of joints and the overall weight.

@bro_toaster1682

what’s wrong with the beta?

@singlegundealer

Replying to @bro_toaster1682 :

hello again

@schfiftyfeiv

Replying to @bro_toaster1682 :

its not the alpha

@glhturbo

Print Profile

0.16mm layer, 2 walls, 15% infill

Strength Issue:The joints are too weak and small. There is a reason why the original Dummy 13 figure printed all the ball joints and connectors flat on the build plate. I think you need to go back and redesign the connections for the ball joints to be separate pieces.

@gundambarbatos

someone didn’t read the instructions

(Edited)

@sin404vr

Replying to @gundambarbatos :

yep they didnt

@sin404vr

Replying to @gundambarbatos :

wait a minute. ARE U THE REAL GUNDAM FROM IRON BLOODED IRPHANS?

@PrintBoogie

Fits nicely! love it!

@Raptr117

whats the sword

@PrintBoogie

Replying to @Raptr117 :

Thunderfury - https://makerworld.com/en/models/602178?from=search#profileId-524604

@user_4122294541

one of the pieces broke, so I ended up printing it again and making this: it won't let me rate it for some reason, but 5 out of 5 stars!

@user_4122294541

this as well

@spike_595

wait did have 2 crunch labs boxes it's just for kids (if u have)

@user_533641730

nice house!

@Cronos10

Print Profile

0.16mm layer, 2 walls, 15% infill

really good addon to dummy 13. i used a fix for the winglets to make them more snug and removed one piece to make it look more like wings. then i panel lined them

@Griteee

Print Profile

0.16mm layer, 2 walls, 15% infill

Turned out well - had a few issues with printing the left side shell pieces but reprint was successful

@user_2580697437

Hey what did you adjust to make it work? We have printed it three times and can't quite figure it out. Thanks

@Griteee

Replying to @user_2580697437 :

Honestly I have no idea, I just kept printing until it worked - if I ever make an adjustment that consistently fixes it I’ll let you know

@FilipeMS

Print Profile

0.16mm layer, 2 walls, 15% infill

Perfect

Show original

@the3dgoat

wow

@user_4004553788

was ok but it kept breaking so I had to change the model I wasted so much filament I hade to use a different roll

@user_4004553788

sorry it is a terrible picture

@user_4004553788

you just need to print 10 pieces

@Geko.3D.Forge

Print Profile

0.16mm layer, 2 walls, 15% infill

Printed multiple times (these are just a few broken pieces from the last print, I threw the rest away before taking the photo then I thought later to share the experience) but I have continuous problems with the pins breaking even though I followed the instructions to be careful not to break them The design is poorly made (a fillet at the base of the joints would have been enough) and the creator seems to have no intention of improving it If you want to waste time and filament this is an excellent project It's a pity because aesthetically they are really beautiful but it is truly flawed Printed in PETG