huudl

cover

PXL_20241004_175840653.MP.jpg

PXL_20241004_124528569.MP.jpg

plate_1.png

2024-10-04_25bb64b95ffe1.jpg

0.2mm nozzle, 0.08mm layer, 4 walls, 15% infill, smooth pei

IMG_3822.JPEG

A size that you will actually want to put on your key chain! This profile has also been improved upon by lowering the detail without affecting the look of the design, using Arachne for wall printing to improve printing speed while reducing filament used (granted it is 2cm haha), and printing with inner/outer/inner to prevent any bulging of outer walls.This still prints both halves individually and they will need to be glued together. Supports are found under the escape pod docking overhang on the front as well as the turret overhang in the center.

0.2mm nozzle, 0.06mm layer, 4 walls, 15% infill

Millennium Falcon Key Chain

Wird in zwei Teilen gedruckt und muss dann zusammen geklebt werden.Gedruckt auf der glatten Platte mit 0.2er Düse.

Printed in two parts and then glued together.Printed on the smooth plate with a 0.2 nozzle.

Star Wars Millennium Falcon Keychain

ASIA

Print Profile(2)

Description

Comment & Rating (26)

This remix is based on

License

Related Models