Martin

cover

img_20230325_151944.webp

screenshot_2024-06-01-21-23-42-258_commiuigallery.webp

plate_1.png

0.2mm layer, 2 walls, 15% infill

plate_2.png

Binky Barnes

IMG_3768.jpg

IMG_3769.jpg

Print profile with all parts in one place - rail crossing and the barriers - on separate plates. &nbsp;Rail crossing printed with Bambu PLA Matte Desert Tan, barrier supports Bambu PLA Matte Charcoal, and rail tracks Bambu PLA Basic Red. Barriers printed with Bambu PLA Basic Red and White. &nbsp;The barrier supports were reinforced. Split rail model into parts, and increased infill for barrier supports to 90%. They should now survive being played with. The original version is fragile, my nephew managed to break the supports off within a few days of playing. &nbsp;The barrier was fixed to increase the hole size. It is now possible to use filament for the connection. To attach the barriers, use a piece of filament. A soldering iron is the right tool to mushroom the filament ends. A flame or lighter is hard to control and PLA warps easily with heat.&nbsp;Thank you for the comment about the barrier hole being too small, and I really liked the barrier supports in black - and thus the most current iteration.

Improved / Reinforced Crossing With Barrier (2 Plates)

compatible with BRIO and IKEA wooden rails.To attach the barrier I use a piece of filament whose end I melt with micro solder.

Wooden train track - Railway crossing with barrier

ASIA

Print Profile(2)

Description

Comment & Rating (49)

License

Related Models