Pokemon Chess Set - remix high poly

These models are remakes of sch00f’s Pokémon Chess.

The original models were low-poly, so I updated the Pokémon models while keeping the base intact. They should fit with the bases from the original creator. 

I tested the profile with 0.2mm and 0.4mm nozzles but noticed barely any difference in quality. Therefore, I printed everything with a 0.4mm nozzle and a 0.12mm layer height to save time.

Supports tree(auto) “remove small overhangs” needs to be unchecked. Otherwise ninetals will loose a tips of its tails and Mewtwo will be missing his arm. This does not work when printing from the mobile app.

Top and Bottom Z distance is set to 0.08 mm, If you want easier to remove supports you can change this setting, although the supported surface might not become as nice.

I recommend hand-painting the pieces, as removing the supports can leave some marks. The supports are intentionally placed very close to the models, so you’ll need tools like a scalpel or small cuticle scissors/nippers to remove them. You can adjust the support Z distance if you find it to difficult to remove. For me the Bulbasaur model was a pain to remove supports, but it was doable with the right tools.

I used citadel paints for my pieces and the chess board is made by Rockman on Makerworld: Clasicc Chess Board - Big by Rockman - MakerWorld which fit perfectly for the size of the pieces.

There is also this really awesome Pokémon themed chessboard by Jorge Torres: Pokemon Chess Board by Jorge Torres - MakerWorld

Pokémon is a product of The Pokémon Company. These models are free for anyone to 3D print. They may not be sold for profit. I do not give permission to sell 3D printed models. These models are for private use only.

From the original creator:

"To better differentiate the pieces they have different base shapes:

-Pawn = round

-King & Queen = pentagon

-Bishop = hexagon

-Knight = heptagon

-Rook = octagon"

EDIT: I have fixed the model for Ponyta and test printed it, it works now. As for mewtwo, please make sure “remove small overhangs” is unchecked  or he will loose one of his arms