Ally X - Xbox One Elite Controller D-Pad

Hi everyone this is my dpad mod for the Ally X. It was designed in collaboration with @YesItsKira https://makerworld.com/en/@YesItsKira. This version doesn't need an outer ring to be printed/used and also it holds the metallic dpad much stronger.

I have provided 4 versions:
- 1 unibody (single print with AMS capable / Resin printers)
- 1 split print (dpad top and dpad bottom)
- 1 unibody like the one above but taller for ally x with skins applied (dbrand)
- 1 split print like the one above but taller for ally x with skins applied (dbrand)
 

I bought a kit that comes with everything you need (magnetic d-pads and magnets). You can get it from here: https://www.amazon.com/dp/B08HRWSP7Z?psc=1&ref=ppx_yo2ov_dt_b_product_details.

Once you receive the kit, you have to remove the 4 magnets from the green d-pad and put them in your printed model. The magnets are secured with pressure, so make sure you press them all the way in.

For installation you can watch this nice video from CPPC Tek: https://www.youtube.com/watch?v=Uac-uMROp8Q

I used the AMS system, PETG filament for support interfaces and PLA-CF as the main material.

For print orientation I put the empty spaces for the magnets facing up.