Working Turbo For 2-stroke, + active lubrication!
Print Profile(0)
Bill of Materials
Description
If you want to use it to run on an engine, I would recommend printing it in a high-heat filament. I used two ID-10mm, OD-15mm bearings on the shaft. The shaft that I used was 10mm in diameter. Lastly, for the engine's exhaust, I used a 9mm high-heat tube directly into the exhaust side of the turbo. Make sure to add two 10mm ID Orings between the turbines and the bearings, so that they don't rub. Added active oil lubrication with guide channels, to prevent friction and ceasing.
Boost Me (for free)
Please boost me it helps out a ton. Check out some of my other models you might find something you like.
Thank you!
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (96)