6x6 Gridfinity baseplate with 6x2 magnet - Free 3D Print Model

Search models, users, collections, and posts

Throttle X design

Tools>Organizers

IP Report

Print Profile(1)

All

H2C

H2S

H2D

P2S

H2D Pro

X2D

A2L

0.28mm layer, 2 walls, 10% infill

Designer

4.3 h

1 plate

4.9(11)

Open in Bambu Studio

Boost

357

481

118

Released

Description

Boost Me (for free)

💡 Enjoying this design? Give it a boost! Boosting is completely free and helps bring more visibility to this creation. If you think it deserves some extra recognition, a simple boost goes a long way in supporting my work. Thanks for your support and for keeping the Maker spirit alive! 🚀🔧 Let me know if you'd like any tweaks to match your style! 🔥

Throttle X Design 3D
🚀 Precision. Innovation. DIY Mastery.
Bringing ideas to life with welding, fabrication, CAD, and 3D printing.

gridfinity baseplate I made for organizing my toolbox with 6x2mm magnet!!!

if you need it with out magnet go check my other listing

this profile is for the A1 only….WILL ONLY PRINT ON BAMBULAB A1 PRINTER

🔗 Follow for more designs!
📌 DIY | CAD | 3D Printing | Fabrication
⚙️ Throttle X Design – Pushing Boundaries, One Print at a Time

gridfinity base plate

gridfinity baseplate 6x6

Comment & Rating (31)

@MakerCameron

Print Profile

0.28mm layer, 2 walls, 10% infill

Worked well. I did have to do the slicer mod and print the cutter "hold down" so that I could use the full 256x256 build plate to print this on my X1C. First time I had done that. But it wasn't hard and now I know how to do something new on my printer. Learning something new is always good!

The profile uploader has replied

@ThrottleX3d

thanks for the rating!!! I forgot to add the X1C gcode and parts to this model...did you found it on my other gridfinity model? the one with out the magnet

@MakerCameron

Replying to @ThrottleX3d :

No. I just saw someone else's comments that you had to do some special things to print this on X1C and I Googled and ended up at the Bambu Lab page where they explained what to do in the slicer and had a link to the "hold back" model. But, yeah, probably would be best to make an X1C specific profile and include that part with your magnet baseplate - just for added convenience.

@user_779010430

love the print but magnets holes are a bit to tight tolerance got 2mm by 6mm magnets from amazon and they are impossible to get in

The designer has replied

@ThrottleX3d

what filament did you use?

@user_779010430

Replying to @ThrottleX3d :

Bambu Lab PETG HF Black

@ThrottleX3d

Replying to @user_779010430 :

ok yeah the profile is for PLA and when you use filament that need higher temperature to print, what it does it it shrink more when it cool down!!!! I would have to play in the setting in fusion to make the hole perfect for PETG or ABS or anything!!!!

@guillotine

Boosted

Print Profile

0.28mm layer, 2 walls, 10% infill

The profile uploader has replied

@ThrottleX3d

thanks for rating my profile

@user_914157723

Print Profile

0.28mm layer, 2 walls, 10% infill

Printed great. Would love a version without the magnet holes.

The profile uploader has replied

@ThrottleX3d

thanks for the rating!!!! I have one with out magnet that is really popular!!! go check it out thanks

@LivBigSki

Boosted

love this model. cant wait to print it. have printed the 6x6 you made but will be printing this next. which magnets do you recommend/

The designer has replied

@ThrottleX3d

I bought my 6x2mm on Amazon and they fit nice! they really are 6mm wide, the only thing is they are 1.66mm thick but for this particular model it's alright!!

@Zoddie

Print Profile

0.28mm layer, 2 walls, 10% infill

Perfectly fits my previously-printed gridfinity prints

The profile uploader has replied

@ThrottleX3d

thanks for the rating

@3DCreationsofRI

What kind of nonsense is "WILL ONLY PRINT ON BAMBULAB A1"? What utter nonsense... It'll print on the P1 and X1, you just have to turn off the cutter exclusion zone.

The designer has replied

@ThrottleX3d

I knew you could do it but I tried turning off the AMS and did not work on my X1C so I did not want to say it was possible if I can't even do it myself. If you want to add your profile for the x1/p1 it would be great!!! Or tell me how to do it and I will update my profile for the x1/p1, I would be more than happy! thanks

@user_4051166421

Print Profile

0.28mm layer, 2 walls, 10% infill

Robust and accurate, what we need in a working shop.

@user_153503027

t-loc

@user_3187460424

Boosted

Print Profile

0.28mm layer, 2 walls, 10% infill

The profile uploader has replied

@ThrottleX3d

thanks for the rating

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.