Pokemon JUMBO card holder - Free 3D Print Model

Search models, users, collections, and posts

teddy.stanescu

Toys & Games>Other Toys & Games

IP Report

Print Profile(2)

All

X1 Carbon

P1S

P1P

X1E

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

A1 mini

0.2mm PETG - plate 1= 157mm width / plate 2 = 147mm width

Designer

3.7 h

2 plates

4.6(11)

For Top Loaders 0.2mm layer, 2 walls, 15% infill 150mm wide

2 h

1 plate

4.3(3)

Open in Bambu Studio

Boost

175

298

186

Released

Description

This is a remake of another card holder model I made for raw cards and slabs, available here: https://makerworld.com/en/models/29464#profileId-214436

There are 2 versions available, one for the older cards which are wider and another for the newer ones which are a little smaller and narrower. For all of these versions there's a pokeball model, a pokemon logo model and a blank one.

I am not sure if they will fit a toploaded jumbo card, although both are made slightly larger than the cards themselves.

If anyone uses toploaders for jumbo cards and they do not fit then please send me a message and i'll update the files so that they can be used with those as well

Comment & Rating (18)

@charlie7082

Print Profile

For Top Loaders 0.2mm layer, 2 walls, 15% infill 150mm wide

printed very well and is a nice way to store jumbo cards

@HiQuality

Print Profile

0.2mm PETG - plate 1= 157mm width / plate 2 = 147mm width

Nice one !

@user_4149820954

Print Profile

0.2mm PETG - plate 1= 157mm width / plate 2 = 147mm width

@michealmojang

I am printing one now for the newer cards It was difficult to figure out which one was the right size because it was not labeled and I do have the card in a perfect fit sleeve and when it prints and I leave my review, I will say if it fits or not

The designer has replied

@teddi.stanescu

Hi there ! Thanks for bringing this to my attention, gotta say it didn't cross my mind that I didn't label them -.-" I have updated the name of the profile for now , and it's description as well. Just gotta wait for it to update now. Plate 1 has a width of 157mm and plate 2 is 147mm in width. Thank you again for bringing this up and sorry for the inconvenience if you had to print multiples.

@michealmojang

I printed out the wrong one. It was too large, but the card still fit so it wasn’t that big of a deal.

@Gurke258

Can you resize it to 160mm? I use Toploader with a width of 160mm ;)

@trip69

Print Profile

For Top Loaders 0.2mm layer, 2 walls, 15% infill 150mm wide

the cards fall

Show original

@trip69

Print Profile

0.2mm PETG - plate 1= 157mm width / plate 2 = 147mm width

The poorly designed cards fall

Show original

@user_3196341475

Print Profile

For Top Loaders 0.2mm layer, 2 walls, 15% infill 150mm wide

@katttivik76

Print Profile

0.2mm PETG - plate 1= 157mm width / plate 2 = 147mm width

@decompil3d

Print Profile

0.2mm PETG - plate 1= 157mm width / plate 2 = 147mm width

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

Related Models

Jeep Kit Card

agepbiz

71 k

22 k

Pokemon-Pikachu(NO SUPPORT)

SnapPrint3D_SuperCrazyPrints

72.1 k

11.8 k

Cascade card wallet V2

Hugo

53.5 k

13.9 k

T-Rex Skeleton Kit Card

Fletch

42.3 k

15.1 k