HueForge Bookmark Pumpkins and Halloween Castle
Print Profile(1)
Description
Ciao a tutti!
Ecco il secondo segnalibro a tema halloween!
Qui le istruzioni
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.08mm
The Model is 40.05x180.01mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.1mm
Filaments Used:
PLA BambuLab Matte Dark Blue Transmission Distance: 1
PLA BambuLab Matte Dark Red Transmission Distance: 1.5
PLA BambuLab Basic Yellow Transmission Distance: 6
PLA BambuLab Basic Jade White Transmission Distance: 5
This print uses 4 unique filaments
Swap Instructions:
Start with Dark Blue
At layer #8 (0.64mm) swap to Dark Red
At layer #10 (0.8mm) swap to Yellow
At layer #15 (1.2mm) swap to Jade White for the rest.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)