EGO 765 CFM Blower Wall Mount - Free 3D Print Model

Search models, users, collections, and posts

DollaWrecka

Tools>Organizers

IP Report

Print Profile(3)

All

H2D Pro

X2D

P1P

P1S

A1 mini

H2C

X1E

H2S

P2S

H2D

X1 Carbon

A2L

0.2mm layer, 2 walls, 15% infill

Designer

1.2 h

1 plate

5.0(57)

0.2mm layer, 5 walls, 25% infill

Designer

1.7 h

1 plate

5.0(35)

Horizontal Mounting (0.16mm layer, 3 walls, 15% infill)

Designer

1.6 h

1 plate

Open in Bambu Studio

Boost

231

942

106

1.4 k

1.1 k

Released

Description

Boost Me (for free)

This is a wall mount for the EGO 765 CFM blower. As far as I know it will only work for that specific model. Mount has two holes vertically for mounting into a stud or drywall anchors.

Update 1: Due to request I added a heavier duty version with larger radii, increased wall thickness, and higher infill. I have not heard any complaints but the heavier duty one should handle a battery attached better.
Update 2: Added a third profile that has the mounting holes horizontal.

I also have the following EGO Blower models available:

Comment & Rating (106)

@Chvfrk98

Just a question on the license on this, I'm I not allowed to add a logo and tag on a version of this mount, giving credit?

@Centurion3D

Looks cool, can you send me the file?

@Juniors

Boosted

Print Profile

0.2mm layer, 2 walls, 15% infill

Nice print. Fits nicely and I like that the holes are stacked so it can go on a stud.

@jroberts072

Boosted

works perfectly

The designer has replied

@dollawrecka

Thank you! Glad it's working well.

@Slaw11975

Print Profile

0.2mm layer, 2 walls, 15% infill

Nice snug fit, printed in PLA to test it out, Will be done again in either PETG or ABS next.

The profile uploader has replied

@dollawrecka

Looks awesome! Thanks for posting a nice clean picture of the print ☺️

(Edited)

@SPOTLESSBYKGM

Print Profile

0.2mm layer, 5 walls, 25% infill

Fits perfect! Printed in PETG-HF Using the settings for PETG-HF. This will be sitting on a Garage that gets pretty hot on a regular basis, so PLA was most certainly not going to cut it. Awesome Model, I hope it lasts. Got me the profile with all the extra walls and extra infill.

@Ritchieg1965

Print Profile

0.2mm layer, 5 walls, 25% infill

Took a few minutes to make sure I seated the blower on it right but seems to be holding it in place. easy print with PLA+

@Chvfrk98

Print Profile

0.2mm layer, 5 walls, 25% infill

worked great. I added a logo but because of the license it doesn’t look like I can upload it.

@DaveYGunN

Print Profile

0.2mm layer, 2 walls, 15% infill

printed perfect with default settings on my A1. It fits perfectly incredibly precise to the battery and it makes it look like the battery is just floating there. I like it so much. I already have another print going for more. 10/10

@SamRahal

Print Profile

0.2mm layer, 2 walls, 15% infill

keeps blower nice and flush up against wall printed in lime green petg

@Macedoj

Print Profile

0.2mm layer, 2 walls, 15% infill

worked well

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

Related Models

The Grinch - Wall Mount

Stag 3D

17.6 k

8.4 k

Wall Hook with one Mount

PrintManufaktur

22.3 k

8.3 k

IKEA Skadis Wall Mount

AU3D

31.9 k

9.9 k

Guitar Wall Mount

VICLER

22.3 k

5.9 k