Christmas tree kitcard - Free 3D Print Model

Search models, users, collections, and posts

HG_Design

Household>Festivities

IP Report

Print Profile(9)

All

A1 mini

P1S

P1P

X1 Carbon

X1E

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

60% scaled (0.08mm layer, 2 walls, 15% infill)

Designer

49 min

1 plate

4.8(304)

[No Card, less Waste] 0.2mm layer, 2 walls, 10% infill

1 h

1 plate

4.9(55)

0.2mm layer | Green & White

1.3 h

1 plate

4.5(389)

0.2mm layer,No AMS 2 walls, 15% Gyroid infill

1.2 h

1 plate

4.5(81)

Click to see more

Open in Bambu Studio

Boost

4008

10655

992

352

12.8 k

7.7 k

Released

Description

Christmas tree kitcard

After being assembled, it can also be used as a Christmas tree ornament.

Comment & Rating (992)

@Marsinatorrr

I have 2 problems, when removing it from the bed, the parts come off the kit card. The font is also not printed correctly because it is much too fine, which can also be seen in the slicer.

@user_2941665212

Boosted

did u wait until it fully cooled? font doesnt really matter tbh

@Plarad

that card really doesn't work - I gave up on it and looking for something else

@adriandios

The same thing happened to me, I printed it twice without success, I have the feeling that it is designed for 0.2 nozzle and not 0.4.

@RiTiSoNo

Print Profile

0.2mm layer | Green & White

Outer part is kinda waste of filament. The "kit card" part doesnt connect to individual parts which makes it useless as a "kit card". Otherwise really nice looking christmas tree!

(Edited)

@user_3818234579

Print Profile

3 Tree Version 55% - Version for reduced scraps per part

Bed Adhesion Issue:parts were curling. see photo.

The profile uploader has replied

@Rob_the_giant

I'm sorry that the first attempt didn't work for you - I printed it with eSun PLA+ filament and here the result was like the pictures. As you can never have enough bellies anyway, I'm printing another one to make sure the settings are correct and I didn't caused any failure. Is it possible that you didn't use PLA or that the printing plate needs to be cleaned (I use Isopropanol alcohol regulary)? Or was the room temperatur maybe colder then normal? If you send me your filament type (please include a photo of the type plate), I will optimize a print profil for you. Best regards, Robert

@user_3818234579

Replying to @Rob_the_giant :

Not sure what "you can never have enough bellies" means lol. The room is at 65 degrees Fahrenheit. I used Basic PLA from Bambu Labs. I have only used the printer for 10 hours, but made sure the plate was clean before printing. I printed the attached snowflake immediately after to make sure it wasn't the printer, and it came out perfect. The printer has been sitting for 11 months, and I decided to fire it up and print something. Your project was the first thing I printed today.

(Edited)

@Rob_the_giant

Replying to @user_3818234579 :

Sorry - I wanted to write "never enaugh trees" - I copied the text direct from the translation tool and didn't checked - I reprinted it now and I came out like in the pictures attatched. I will change the filament type to Bambu Lab Basic PLA and try to share the print profil with you.

@legion1g

Easy and fast print. Only the star on top we missing 😊

@TomoHr

Print Profile

60% scaled (0.08mm layer, 2 walls, 15% infill)

Great!

@user_3687134668

Nice. How did you achieve the bumpy surface texture on the central part?

(Edited)

@TomoHr

Replying to @user_3687134668 :

Printer made it itself

@TomoHr

Replying to @user_3687134668 :

I do not know ;)

@kelly.lenn.grea

Print Profile

0.2mm layer | Green & White

this was my first print ever on my p1p turned out amazing. You definitely need to wait for the build plate to fully cool otherwise you'll break it off in pieces

@B_Moxie

I wish I had seen this comment bc that's what happened to me. I was doing a test print bc I thought these would be cute for my son's Christmas party but in my excitement to get it off, all the connecting parts fell right off! What settings did YOU use to print yours? TIA

(Edited)

@rupernac

I let mine cool over night and it still came in pieces): I think my adhesion is too good

@Pbr_HL

Print Profile

0.2mm layer | Green & White

very cute print, but it came apart from the card directly when taking it from the plate.. please make the links to the card stronger

@hadan8088

May I ask what plate you're using? I have a feeling this would work much better coming off the gold pei plate (after cooling) than off the tacky plate.

(Edited)

@Pbr_HL

I think it was the Coolplate Supertrack 👀

Show original

@3DNow.PT

Amazing work and easy to print

@Pioneer

Print Profile

4 Trees + Optional Star Topper & Optimised kit Card

Nice, but where is the „christmas“? Edit: Was probably my fault by removing it :)

The profile uploader has replied

@thedomsi

Boosted

Hi, thats not my print profile. You have edited it (removing the star) and probably accidentally removed the word "Christmas"

@Pioneer

Replying to @thedomsi :

could be? added one star :)

@user_3132300408

Print Profile

0.2mm layer,No AMS 2 walls, 15% Gyroid infill

smooth print🫡

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

Related Models

Christmas Trees

gabriele_ristallo

43 k

14.6 k

Modern Christmas Trees

lov3d

32.1 k

8.6 k

Christmas Tree

Steve

18 k

5.3 k

Christmas Tree with Skirt

cbass419

25.1 k

6.3 k