Ghost wolf -V8 - Free 3D Print Model

Search models, users, collections, and posts

WHEANG-

Hobby & DIY>Vehicles

IP Report

Print Profile(2)

All

A1 mini

P1S

P1P

X1 Carbon

X1E

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.2mm layer, 2 walls, 20% infill

Designer

38 h

12 plates

4.9(39)

Cranks to turn engine

1.7 h

2 plates

5.0(1)

Open in Bambu Studio

Boost

1766

3176

165

2.1 k

290

Released

Bill of Materials

Maker's Supply Kits and Parts

Select all

M2x10 FHCS Machine Screw (20PCS) - AA007

M2 Stainless Steel Flat Head Cap Machine Screws (FHCS)

M3x14 FHCS Machine Screw (20PCS) - AA189

M3 Flat Head Cap Machine Screws (FHCS)

Description

《GTWF-V8》

Size: 199X133X129mm Weight: Calculated according to setting configuration Total: Red (145g) Gray (566g)

Printing time: 1 day, 13 hours, 48 minutes Installation Accessories: 3M14mm, 100 pieces, 2M10mm, 26 pieces

Material Consumption: 1 Volume Author: WHANGENG

Material recommendations: PETG Manufactured October 1, 2024

Thank you very much for downloading and printing. times. There were no print quality issues and the assembly process took a long time. But it's also fun and fulfilling. The model design was inspired by the V8 car engine. 3D printing models are designed to ensure that the model maintains high precision and decorative quality while making printing easier, with all details being original. The V8 engine cylinder design is the core technology, plus the piston crank linkage, and the model is for learning, communication, assembly only, and shall not be used for any commercial activities without the permission of this author.

thank your.

Documentation (1)

Assembly Guide (1)

GTWF-V8 .pdf

Comment & Rating (99)

@user_76900635

You said "This model was originally designed and manufactured for WHANGEG and has been printed and verified several times." Since you're not the original author of this design, you should be disqualified from submitting this into the contest.

(Edited)

The designer has replied

@AENXGP

If it was designed by someone else, please provide the source of the model

@user_76900635

Replying to @AENXGP :

You said so yourself in the description.

@AENXGP

Replying to @user_76900635 :

The author mentioned in the description is me

@user_1892856307

Boosted

Print Profile

0.2mm layer, 2 walls, 20% infill

a box full of bits printed with no issues just need to put it together, now completed and look great goes with the rest of the collection

(Edited)

@user_3950259075

Hello Mr. Geng, thanks for the great model! I created a hand crank and drill attachment that attach to the non-gear side of your engine. If you would like I can send you the files and you can upload them for everyone. It made it much easier to break in the engine with a drill and now it spins much more smoothly.

The designer has replied

@AENXGP

Thank you very much for your creation. You can publish it separately.

@user_3950259075

just uploaded as a print profile. Users - please let me know if I should change the scaling.

@Shorty8416

Boosted

Print Profile

0.2mm layer, 2 walls, 20% infill

good print on A1

@ALuo

Where are the assembly instructions

The designer has replied

@AENXGP

At present, only pictures are available. Explanation will be provided later

@haydenckelsey

Replying to @AENXGP :

Any estimate on when “later” is? I would love to print, but without the assembly instructions I feel it’s too much of a risk. The current photos aren’t a very good guide

@haydenckelsey

Replying to @AENXGP :

even an assembly video would be great!

@user_4225055609

Boosted

Print Profile

0.2mm layer, 2 walls, 20% infill

muy bien

@NasiF

Anyone printed this in PLA yet? Or should I bite the bullet and get the PETG filaments, note I have only printed in PETG once. I want to print this for my dad and assemble it with him for Christmas.

The designer has replied

@AENXGP

All materials can be printed, except for TPU

@user_3979806795

Hi @NasiF , were you able to print the engine in PLA? I realized I started printing in PLA and needed PETG. I'm not sure what part the TPU is

(Edited)

@NasiF

Replying to @user_3979806795 :

I did not end up printing this. Decided to start easier and do the 2 cylinder engine kit from Bambu labs. My dad (61) and I (29) had a great time building it together. Next year Christmas or his birthday will probably be this motor

@yantaris

3M14mm - is that means M14 × 3 mm (14 mm length and 3 mm width) ? or 14 mm length and 3 mm carving ? Could you please provide example of it, because we have another standart and I don't understand what means 3M14mm

@user_3979806795

hi @yantaris , were you able to figure out what screws were needed?

@yantaris

Replying to @user_3979806795 :

Accessories: 3M14mm, 100 pieces, 2M10mm, 26 pieces

@CDPond_YYC

The 3 represents 3mm nominal outside dimension of the screw thread. Normal screw descriptions for machine screws Metric machine screw dimensions are specified by "M" followed by the nominal diameter in millimeters, then a hyphen, the pitch in millimeters, and then a "x" followed by the length in millimeters (e.g., M6-1.0x20). But we see that the Maker's Supply shop typically just lists the metric nominal size and length... eg. M3x14, which is okay because they sell the nuts in the same thread pitch as the machine screws. Apologies if you were already aware of those specifics. They're more important if you're buying the screws off Amazon or some other site, where there are hundreds to choose from but may have a couple of different thread pitches. Also good to know if the heads are intended to be dome or cap style.

@robustGAWD

Instructions would be great but its not THAT hard. I'd be down to make an instruction manual, message me Geng

The designer has replied

@AENXGP

@robustGAWD

Replying to @AENXGP :

send me a private message, I cant message you yet

@AENXGP

Replying to @robustGAWD :

I'm not interested in this model for sale. I'm designing an updated model without screw accessories

@grillmatt

Print Profile

0.2mm layer, 2 walls, 20% infill

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

Related Models

Print-in-place v8 engine fidget

WillCAD

32.8 k

10.3 k

Dyson trigger lock

fabi.swob

7.6 k

1.1 k

Ghost Reader

Sevro

16.2 k

10.2 k

Ghost with legs

Loomio

7.5 k

1.5 k