DJI MIC 2 TX Multi-purpose Bracket Material

This model is a microphone mount designed specifically for the DJI MIC 2 TX.
It is modeled with 100% accuracy to fit the microphone clamp.
The mount is sturdy and prevents the microphone from falling, making it suitable for recording exhaust sounds from motorcycles and cars.
The material used is ASA, which is suitable for outdoor recording.
The base can be freely modified.
It can be changed to a threaded attachment, a pipe clamp, and so on.
Feel free to create your own design.
!!If you have any ideas for mounting the base, please feel free to contact me for modifications and discussions!!

Example: A M6 metric threaded heat-shrink nut paired with a 1/4" threaded adapter. Adjust the size of the heat-shrink nut to freely install it on the desired part.

--
Example: 17.5MM pipe diameter paired with a strap. Adjust the pipe diameter size to install it on a suitable diameter.
Strap size: KSS HV300SBK width 4.5mm

--

Updated 2024/10/01

The pipe diameter printed part may detach from the heat bed during printing. The support pattern has been updated.