Queen of Misery #30
Print Profile(1)
Description
Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mm
The Model is 200x200mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.1mm
Filaments Used:
PLA+ Numakers Pitch Black Transmission Distance: 0.1
PLA+ Numakers Midnight Gray Transmission Distance: 0.2
PLA+ Numakers Dark Grey Transmission Distance: 0.5
PLA+ Numakers Simply Silver Transmission Distance: 0.5
PLA+ Numakers Light Gray Transmission Distance: 0.7
PLA+ Numakers Ivory White Transmission Distance: 4
PLA+ Numakers Pure White Transmission Distance: 3.3
PLA+ Numakers Cool White Transmission Distance: 1.8
This print uses 8 unique filaments
Swap Instructions:
Start with Pitch Black
At layer #15 (0.72mm) swap to Midnight Gray
At layer #20 (0.92mm) swap to Dark Grey
At layer #25 (1.12mm) swap to Simply Silver
At layer #30 (1.32mm) swap to Light Gray
At layer #35 (1.52mm) swap to Ivory White
At layer #40 (1.72mm) swap to Pure White
At layer #45 (1.92mm) swap to Cool White for the rest.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)