PCPanel Pro and Stream Deck XL stand V2

Hi there  :)

So this is the second version of my idea for a combined stand/mount for a PcPanel Pro + Stream deck XL. After using the previous design for a few days I found it way too chunky and took more space on the desk than I would have liked. So after some tinkering ( and a lot of wasted filament for other potential prototipes ), I came up with this one. I was not able to repurpose  the USB hub from the older design so instead I used two smaller ones ( way smaller compared to the original USB hub ) and daisy chained them so that there would be external and internal ports ( for connecting the PCPanel Pro and the Stream Deck XL )

For assembly, you will require 5, m3 threaded inserts & 9, m3 10mm screws. 
Hope you enjoy it! :) 

Links:
USB HUB 1 https://www.amazon.de/-/en/USB-Hub-3-0-Port-Compatible/dp/B0BG51CGK4?nsdOptOutParam=true
USB HUB 2 https://www.amazon.de/-/en/IZyufan-Distributor-Aluminium-Housing-Notebook-USB-3-0/dp/B0BS9FPRF5/258-0127843-1670326
USB HUB 3 https://www.amazon.de/-/en/Splitter-Expander-Portable-MacBook-Surface-silver/dp/B0BMXDGSGS/258-0127843-1670326
Threaded Insert https://www.amazon.de/-/en/Threaded-RX-M3x5x4-Bushings-Plastic-Insertion/dp/B0CDH36ZMX?psc=1
Please note the links I've provided for the USB hubs are not the exact one that I have used in my personal print / build. But should be almost exact and I'm 90% sure that you shouldn't have issues.