Gardena Sileno City Cutting Disk 190 mm
Print Profile(1)
Bill of Materials
Description
I upgrade my Gardena Sileno City with a 190 mm cutting disk with 6 instead of three knifes. The new cutting disk is screwed onto the original one using the standard screws to mount the knifes. To mount the 6 new knifes I added 6 M4 inserts.
Printing:
- no supports needed
I used ASA for this print, but PETG will also work
Additional material:
- 6 threaded inserts M4
https://cnckitchen.store/products/gewindeeinsatz-threaded-insert-m4-standard-50-stk-pcs
Assembly:
- After printing, melt in the M4 inserts into the 6 outer holes
install the 6 nes knifes using the standard screws coming with the knifes
- remove the original disk (TX15 screw driver needed)
- remove the protection cover (TX20 screw driver needed)
- install the original disk
mount the new disk onto the original disk using 3 crews coming with the knifes
- please make sure there is enough clearance between the knifes and all 3 wheels
Boost Me (for free)
If you find my design useful, please boost this model.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (19)