Frankenstein-inspired earrings

My wife began asking that I design earrings for her and her friends. so I have created about 50 designs that I will slowly upload - so be on the lookout for new designs! Most can be printed with a .4 nozzle but for extra detail you may want to consider a .2 nozzle. I have printed these successfully on my P1S and A1 Mini. You will need earring hardware - i use the following kit from Amazon -- https://www.amazon.com/gp/product/B09YV65J75/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&th=1

Filaments Used:

PLA BambuLab Matte Charcoal Transmission Distance: 0.6

PLA Bambulab green Transmission Distance: 2.3

PLA Bambulab Yellow Transmission Distance: 5.2

PLA BambuLab Matte Ivory White Transmission Distance: 3.5

This print uses 4 unique filaments

Swap Instructions:

Start with Charcoal

At layer #12 (1.04mm) swap to green

At layer #13 (1.12mm) swap to Yellow

At layer #21 (1.76mm) swap to Ivory White for the rest.